Showing 28 products

Jadrak T-SYSTEM 3 Jaw Self Centering Chuck (TCK-B)
Hot
New
Pre-order
Out stock

SKU: TCK-B

AVAILABILITY: In stock (81 items)

PRODUCT TYPE: 1009680652

VENDOR: Jadrak

This is a 3-axis interlocking automatic centering chuck that has not been developed by road building companies in the US or Japan. Just by turning, the 3 axes interlock and automatically adjust the centering to easily hold blanks or grips...

$28.00
Jadrak T-SYSTEM Supporter for Rod Drying System (TVS)
Hot
New
Pre-order
Out stock

SKU: TVS

AVAILABILITY: In stock (81 items)

PRODUCT TYPE: 1009680575

VENDOR: Jadrak

This suppoter is assembled with TAP800 Station and hold blanks not to fall down without scratch. 3 rollers with ball bearing are enough to support blanks or rods. MODEL : TVS MATERIAL : Aluminum + MC Nylon + Stainless Steel...

$25.60
Jadrak T-SYSTEM Hand Wrapper and Rod Dryer (TMSC)
Hot
New
Pre-order
Out stock

SKU: TMSC-110-A

AVAILABILITY: In stock (97 items)

PRODUCT TYPE: 1009680749

VENDOR: Jadrak

Hand Wrapping and Drying System including 3 Jaw Self Centering Chuck Specification Table Model name: TMSC Major material: Aluminum Components : Length 800mm + 150mm station each / MKB motor part 1ea / TVS support 1ea / TTB tensioner 1ea...

$132.00
Jadrak T-SYSTEM B-B Roller (TRL45)
Hot
New
Pre-order
Out stock

SKU: TRL45

AVAILABILITY: In stock (1000 items)

PRODUCT TYPE: 1009680564

VENDOR: Jadrak

Ball Bearing roller shows best performance for every kinds of drying system. Parts are optimized 8mm thickness stands. MODEL : TRL45 MATERIAL : MC Nylon,Rubber, SS Ball bearing SIZE : I.D. : 6.0mm / O.D: 46mm / Length : 9.0mm...

$4.00
Jadrak T-SYSTEM Aluminum Station Connector (TCN)
Hot
New
Pre-order
Out stock

SKU: TCN

AVAILABILITY: In stock (88 items)

PRODUCT TYPE: 1009680574

VENDOR: Jadrak

Connector for TAP800/TAP150 T-SYSTEM Aluminum Station MODEL : TCN MATERIAL : Stainless Steel etc Connector parts to conenct TAP Series. It combines all TAP series tightly as it is whole body. ASSEMBLY EXAMPLE

$4.00
Jadrak T-SYSTEM 4 Jaw Centering Chuck (TCK-A)
Hot
New
Pre-order
Out stock

SKU: TCK-A

AVAILABILITY: In stock (94 items)

PRODUCT TYPE: 1009680571

VENDOR: Jadrak

Traditional Aluminum Rod Holder Chuck to center with 4ea locking screw. MODEL :TCK-A MATERIAL : Aluminum SIZE : Body OD : 60mm / ID 47mm / Hole Dia. 8mm HOLDING RANGE : 5mm ~ 32mm Scratch Free platic cap is...

$16.00
Jadrak Rod Dryer with Self Centering Chuck (TDR5)
Hot
New
Pre-order
Out stock

SKU: TDR5-110-A

AVAILABILITY: In stock (98 items)

PRODUCT TYPE: 1009680705

VENDOR: Jadrak

After applying epoxy to the lapping thread, it must be continuously turned to prevent the epoxy from flowing. rod dryer is the best cost-effective for rod drying.Motor part chuck is a 3-axis linked automatic centering chuck (TCK-B). A simple twist...

$47.60
Jadrak T-SYSTEM Hand Wrapper and Rod Dryer-800mm Aluminum Base 2ea (TMSD)
Hot
New
Pre-order
Out stock

SKU: TMSD-110-A

AVAILABILITY: In stock (100 items)

PRODUCT TYPE: 1009680905

VENDOR: Jadrak

This is a dryer with a total length of 160cm for 1pcs, including a 3-axis interlocking self-chuck and two TAP800 aluminum base stations. Model name: TMSD Material : aluminum Length : 800mm + 800mm Components: Motor,Chuck(TCK-B), Cord, Motor Stand,2 *...

$148.00
Jadrak T-SYSTEM Low Speed 18RPM Motor (JSM18)
Hot
New
Pre-order
Out stock

SKU: JSM18-110

AVAILABILITY: In stock (99 items)

PRODUCT TYPE: 1009680566

VENDOR: Jadrak

Very rare item with 8mm shaft and optimized for Rod Drying system. ■ MODEL : JSM18 ■ SIZE : Body Dia. 48mm / Shaft Dia. 8mm ■ SPECIFICATION : AC Motor / Speed 18rpm / Clock-wise / Voltage 220V R...

$7.20
Jadrak T-SYSTEM Tensioner for Hand Wrapping System (TTB)
Hot
New
Pre-order
Out stock

SKU: TTB

AVAILABILITY: In stock (95 items)

PRODUCT TYPE: 1009680745

VENDOR: Jadrak

As a tensioner exclusively for T-SYSTEM, it is a tensioner that can easily and freely move the TAP base station left and right. ■ Mode : TTB ■ Material: aluminum + plastic + ceramic ■ Dimensions: Tensioner main frame 150mm...

$25.60
Jadrak T-SYSTEM Aluminum Profile Station (TAP800)
Hot
New
Pre-order
Out stock

SKU: TAP800

AVAILABILITY: In stock (93 items)

PRODUCT TYPE: 1009680695

VENDOR: Jadrak

Long Aluminum Station of T-System. It is used for installation of T-system all sub parts. MODEL : TAP150 MATERIAL : Aluminum SIZE : Width - 145mm / Length : 800mm ASSEMBLY EXAMPLE

$25.60
Jadrak T-SYSTEM Motor Base Kit with Motor and Chuck (MKB)
Hot
New
Pre-order
Out stock

SKU: MKB-110-A

AVAILABILITY: In stock (99 items)

PRODUCT TYPE: 1009680657

VENDOR: Jadrak

Jadrak T-SYSTEM Motor Base Kit with Motor,Chuck and TAP150(MKB). It cannot be used alone. It should be combined with stand and supporter. MODEL : MKB MATERIAL : Aluminum SIZE : Station Length -150mm MOTOR : Speed - 18rpm, 220v or...

$46.40

This is a standard cookie notice which you can easily adapt or disable as you like in the admin. We use cookies to ensure that we give you the best experience on our website.