USB version of the TVDD direct vertical Rod dryer. This motor is capable of speed control (up to 40rpm) and direction change (Electrical cord included) It is very compact and effective when several dryers are needed in a small space.
The motor part chuck is a 3-axis linked automatic centering chuck (TCK-B). It is centered with a simple turn, and it holds the rod firmly together.
3-axis automatic centering chuck (TCK-B),USB dry motor and cord (Speed control, bidirection) , MDF and Concreate screws - Required assembly.
Support body, 3 rollers - It does not move after installation, so select a location carefully to avoid getting caught in the guide.
When mounting on the wall, first fix the support part with 2 screws, then connect the chuck and electric wire. After installing the motor, it is difficult to screw into the wall.
Please make sure it is horizontal
First, you need to mount the support on the wall, then attach the chuck and motor.
Install the supporter to avoid the location of guide position.
This is a single rod dryer.
It is a 3-axis interlocking automatic centering chuck.
After attaching 3 pieces of non-woven fabric, fix the screws with a wrench.
Just by turning, it easily holds blanks or grips without eccentricity.
Motor part body and support body. Screws for MDF (4pcs), concrete, gypsum board screws (4pcs) included
DC Moter 12V USB , Speed Up to 40rpm and low as 8rpm, Direction changeable