Zoom
PRODUCT INFORMATION
```html
```
1-Piece Set / 3-Piece Set Available
Choose the set that best fits your needs.
Save more with the 3-Piece Set.
This is a direct wall-mounted rod dryer that does not require a Space Wall system. Its compact size allows multiple units to be installed even in limited spaces, making it an effective solution for drying multiple rods. The unit uses a dedicated low-speed USB motor (20 RPM), allowing convenient operation without a separate 220V power connection. The motor is equipped with a Simple Chuck, and flexible and durable rubber O-rings directly grip the rod for secure and stable holding. The O-rings flexibly conform to the diameter of the rod, minimizing wobbling and play while keeping the rod securely in place during rotation.
- Motor Parts: Motor body, Simple Chuck (TCK-F), DC motor (20 RPM), USB power cable, 8 O-rings, L-shaped hex wrench
- Stand Parts: Support body and 3 rollers. Once installed, the support position is difficult to reposition. Please carefully check the rod length and installation location before mounting the unit.
- Tip: When installing the unit on a wall, we recommend securing the support part first and then connecting the motor and chuck. Installing the motor first may make it difficult to secure the screws to the wall.
Product Features
Direct Wall Mounting – No Space Wall Required
The unit can be installed directly onto a wall without a separate Space Wall system, allowing efficient use of limited space.
The unit can be installed directly onto a wall without a separate Space Wall system, allowing efficient use of limited space.
USB-Only Motor
Speed: 20 RPM
Do NOT connect the unit to a PC or power bank.
Speed: 20 RPM
Do NOT connect the unit to a PC or power bank.
Simple Chuck (TCK-F)
The simple chuck allows the rod to be inserted and secured without complicated operation. It can accommodate rods of various shapes and diameters. The flexible O-ring gently grips the rod while providing firm support, reducing wobbling and off-center movement during rotation for stable drying.
The simple chuck allows the rod to be inserted and secured without complicated operation. It can accommodate rods of various shapes and diameters. The flexible O-ring gently grips the rod while providing firm support, reducing wobbling and off-center movement during rotation for stable drying.
Compact Wall-Mounted Design
The compact design takes up very little space, allowing multiple units to be installed side by side even in narrow areas. It is ideal for environments where multiple rods need to be dried or stored at the same time.
The compact design takes up very little space, allowing multiple units to be installed side by side even in narrow areas. It is ideal for environments where multiple rods need to be dried or stored at the same time.
Installation Guide
1. Check the Installation Location
Determine the positions of the motor and support parts first, taking into consideration the rod length and the space required for rotation.
Determine the positions of the motor and support parts first, taking into consideration the rod length and the space required for rotation.
2. Secure the Support Part First
Firmly secure the support part to the wall first. If the motor is installed first, it may make the wall screw installation more difficult. Please determine and secure the support position before installing the motor.
Firmly secure the support part to the wall first. If the motor is installed first, it may make the wall screw installation more difficult. Please determine and secure the support position before installing the motor.
3. Connect the Motor and Chuck
After the support part has been installed, connect the motor and chuck. Insert the rod into the chuck, rotate the chuck to center the rod, and then secure it firmly.
After the support part has been installed, connect the motor and chuck. Insert the rod into the chuck, rotate the chuck to center the rod, and then secure it firmly.
4. Connect the USB Power
Connect the USB power cable to a 5V USB power source to operate the unit.
Connect the USB power cable to a 5V USB power source to operate the unit.
Important Safety Information
⚠️ Power Information
Do NOT connect the unit to a PC or power bank.
Use a suitable 5V USB power source only.
CUSTOMER REVIEWS
Related Products
