PRODUCT INFORMATION
Model : JQE240
Net Volume : Resin - 120ml, Hardner : 120ml
Mixing Ratio : Two-Part, 1:1
Working Time : 3min
Set Time : 5min, Cure Time : 24 hours
Easy to use : With the syringe already infused, squeeze it 1: 1 into the dish and stir it 10 times with a stick.That is all.
2. Fast Working Time : Normally, epoxy finish for rod building starts to harden about 30 ~ 1 hour. This is working time for 8-10 guides But you need only 1 guide to repair. This epoxy finish starts to harden in 3 minites. You just turn around 5 minutes by hand without Rod dryer. Epoxy will not flow anymore.
3 Reusable Syringe pakcing : After one-time use, close the cap and store it at room temperature. That is okay if resin and hardner does not mix.
It is a product that uses the property of penetrating into the air hole in epoxy and volatilizing. Please pay attention to fire and store with the lid closed tightly.
I haven't tested it accurately in volume, but it work tens of times roughly.
Just spray over Epoxy finish from 10~20cm distance 1 or 2 times.Even if you spray too much, the effect is the same. We recooomend once or twice.
Step1 Melt the epoxy part of the guide foot with alcohol lamp or light and remove the existing guide.
Step2 After tidying up, wrap the same guide (purchased separately). -Wrapping method needs Google search
Step3 Apply epoxy finish to the wrapping yarn and run for 5 minutes. Use 24 hours later.
It is volume sales of Instant Guide Repair Kit. "Wrapping Finish" is normal epoxy but set time is very quick. Not easy for normal guides wrapping.
Due to very quick set time, we recommend for Rod Building professional or shop to repair customer guides one or two.
CHRACTERISTICS


CHARACTERISTICS AND USAGE
HOW TO REPAIR
Missing or broken rings are difficult to replace. The entire guide must be replaced. Here's how to replace guide.
CUSTOMER REVIEWS