This is a blank for cranking only.
Please contact us for shipping costs at firstname.lastname@example.org or whatsapp 82-10-2602-7129
||8 ~ 14lb
||8 ~ 14lb
The figures are based on actual measurement of one blank, not all numbers. Depending on the blank, there may be some partial deviation.
MC-R60 butt part 30~40cm unpainted. Those thinking of it as a 2-handed grip will need some extra work.
Although the length is a bit short, it is possible to adjust the length with a carbon pipe (PCK150/WCK150). The outer diameter of the butt is 12.9 mm, so it does not fit into the PCK150 (inner diameter 13 mm). The part of the blank butt needs to be sanded down. In the case of PCK155, the floating part becomes too large toward TIP. However, when using a reel seat with an inner diameter of 15.5 mm, it is recommended to work with PCK155.
The material is medium elastic carbon. It is not impossible to use glass, but considering the weight and thickness, it is difficult to create the same standard, so we chose the next best option.
Light jigging rods are also available. However, compared to dedicated blanks, the lure weight that can be supported is not that much. Although possible, we do not recommend it.
Color of Blank
Available in matte black and gloss white. Matte Black is painted the same color throughout.
Glossy white blank: 30 to 40 cm of the butt is not painted because communication with the factory is not accurate. This happened due to a lack of understanding of road building on the factory side, which assumed production with a 1-hand grip.
For those who want to use a two-handed grip, it is necessary to check or paint the part exposed by grip installation.